| Customization: | Available |
|---|---|
| After-sales Service: | Within One Year Warranty |
| Warranty: | Within One Year Warranty |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical parameters of metal wire drawing machine | |||||
| Model | Capstan Dia.(m) | Max.Draw Passes | Max.Incoming Wire Dia. (mm) |
Min.Outgoing Wire Dia. (mm) |
Motor Power(KW) |
| LZ-200 | 200 | ≤14 | 2.2 | 0.25 | 4.0-5.5 |
| LZ-250 | 250 | 2.6 | 0.40 | 4.0-7.5 | |
| LZ-300 | 300 | 2.8 | 0.50 | 5.5-7.5 | |
| LZ-350 | 350 | 3.5 | 0.60 | 5.5-1.1 | |
| LZ-400 | 400 | 4.2 | 0.75 | 11-15 | |
| LZ-450 | 450 | 4.5 | 0.80 | 11-22 | |
| LZ-500 | 500 | 5.5 | 1.30 | 15-30 | |
| LZ-560 | 560 | 6.5 | 1.30 | 18.5-45 | |
| LZ-600 | 600 | 7.0 | 1.35 | 30-55 | |
| LZ-700 | 700 | 8.0 | 1.80 | 45-75 | |
| LZ-800 | 800 | 10 | 2.50 | 55-90 | |
| LZ-900 | 900 | 12 | 3.00 | 75-110 | |
| LZ-1000 | 1000 | 14 | 3.50 | 90-132 | |
| LZ-1200 | 1200 | 16 | 4.00 | 90-132 | |
| Remark | Above parameters is base on standard configuration,only for reference, cusromize the machine according to user's specific requirements |
||||
| Name | Model | Range of Dia. |
| Discharging Machine | ||
| Pointing Machine | ZE96 | 6.5-1.5mm |
| Butt-Welding Machine | UN-7 | 7--1.5mm |
| Metal wire drawing machine | ||
| 1 | Wire drawing drum material | Cast steel, tungsten coating and surfacing, HRC60. Roughness is less than 0.8umm |
| 2 | Drum cooling | 1. Drum inside cooling: drum's inner wall has 3 water channels which displayed in 120 degrees direction by water spraying. 2. Drum external cooling: the ventilation pipe below the outside of the drum uses 360 degrees of forced air cooling on the surface of the drum and wire to lower the surface temperature of the reel below 80 degrees |
| 3 | Die box cooling way | The drawing die is cooled by using direct water inlet and outlet water, and the cooling effect is especially good |
| 4 | Tension machine | Built-in |
| 5 | Main frame | Steel plate and square tube welding |
| 6 | Safety device | Safety protection cover, broken line stop test |
| 7 | Vacuum design | Vacuum cleaning hole |
| 8 | Lighting | Each machine is equipped with separate lighting |
| 9 | Parking brake | Pneumatic brake |
| 10 | Electric cabinet | Protection level IP54 |
| 11 | Electrical system | Machine distribution structure, PROFIBUS-DP field bus control |
| 12 | Energy consumption | Monitoring is equipped with electricity meter |
| 13 | PLC | HUICHUAN (Inovance) brand |
| 14 | Touch screen | HUICHUAN 10inch screen |
| 15 | Frequency motor brand | Fang da |
| 16 | Low voltage apparatus | Zhengtai |
| 17 | Inverter | HUICHUAN (Inovance) brand |
| 18 | Sensor | OMRON |
| 19 | Field cable supply | The dedicated control line is provided by the seller, and other control cables and power cables are provided by the buyer |
1: Metal wire drawing machine is seamlessly integrated into a single, compact unit for maximum efficiency.
2: Designed for economic feasibility and user-friendliness, with minimal maintenance requirements.
3: Available in both left and right-hand versions to accommodate Non-Ferrous metals.
4: Achieve impeccable quality in metal wires, meeting the highest industry standards.
5: Features a single wire path without crossovers, enabling effective single-wire drying.
First double capstan option for efficient wire accumulation.
Choose between dead block coilers or drawing coilers to suit your specific requirements
1, What is your strong point in this machine ?
Q: We have several models of wire drawing machine for your choice. Most important, we cooperate with wire factories.
We have rich experience in wire prouction which can make your worker to use the machine more earlier and quickly
2. Quality how to guarantee ?
Q: Our machine main frame 1 year. 24 online servie, any problems you have, welcome to contact me at first time.
3. If we can visit your factory ?
Q: Be sure, you can visit our factory ,also can visit our cooprated wire factory for learning.
4. If we recevie machine, but have problem,how to do ?
Q: At first time, we will check machine and solve it. If our problem, we will resposiable for it.
But to be honor it that our machine do not have problem untile now.
){kind=link}